Leading 10 common forklift accidents ， forklift operation should take note of these matters ！.
Leading 10 common forklift accidents ， forklift operation should take note of these matters ！.
Blog Article
Do not undervalue the forklift at work. If the operation is not good, there will be major mishaps in mins, and there are lots of crashes entailing forklifts.
Instance 1: The forklift freight obstructed the driver's sight, and the person in front can not be located, causing a moving crash.
Instance 2: In order to keep the equilibrium of the forklift when raising hefty products, the workers used their body weight as the counterweight, which almost created casualties.
Instance 3: The size of the forklift freight surpasses the allowable width of the path and holds on the roadside shelf, which almost causes an crash.
Instance 4: Forklift is speeding up and rolls over during a turn.
Instance 5: The forklift motorist did not notice the pedestrian, and the pedestrian did not observe the forklift.
Instance 6: The forklift raises the workers illegally, the forklift chauffeur does not wear the seat belt, the forklift lifter drops and the driver is squashed when the forklift rolls over.
Case 7: The forklift vehicle driver did not use a safety belt and dropped from the lorry when it surrendered and was squashed.
Forklift procedure must pay attention to these matters ：.
Begin.
1. Prior to starting, observe the surroundings, and after confirming that there are no obstacles that hinder the security of driving, honk the horn first and then start.
2. For cars with hydraulic (air pressure) brakes, the brake hydraulic pressure ( atmospheric pressure) scale need to be risk-free before starting.
3. When the forklift begins with a load, the driver should first validate that the lots is steady and reputable.
4. The begin must be slow-moving and constant.
Driving.
1. When driving, the height between the bottom end of the fork and the ground need to be kept at 300mm-400mm, and the mast needs to be slanted backward. .
2. Do not raise the fork too expensive when driving. When entering and leaving the work site or while driving, beware that there will be no challenges overhead. When the load is taking a trip, the fork should not be raised too high, which will certainly influence the security of the forklift. .
3. After unloading, the fork must be reduced to the typical driving setting prior to driving. .
4. When transforming, if there are pedestrians or automobiles close by, the driving signal ought to be released initially. High-speed doglegs are prohibited. High-speed doglegs will cause the automobile to lose side stability and tip over. .
5. When the forklift is downhill, it is strictly prohibited to shut off the flame and slide, and it is prohibited to brake all of a sudden while driving with loads unless there are unique conditions.
6. When the forklift is running, it should follow the web traffic rules in the factory and have to keep a specific safety and security range from the vehicle in front. .
7. When the forklift is running, the load must be in the lowest placement that does not prevent the driving, and the gantry ought to be appropriately tilted back. The tons will not be increased except when piling or packing. .
8. The height of the lots should not obstruct the vehicle driver's sight. In unique circumstances, when the thing impacts the forward vision, drive at a low rate when reversing.
9. It is prohibited to turn on the ramp, nor to drive across the ramp. .
10. The secure driving rate of the forklift in the factory area is 5 km/h, and it has to drive safely at a reduced speed when getting in the manufacturing workshop location. .
11. When the forklift is lifted, lifted or driven, it is restricted for employees to base on the fork to hold products and play a stabilizing role. .
12. If issues are located, they will be fixed and reported in a timely manner, and they will certainly never ever operate with ailments or hide them.
loading and unloading.
1. When fork-loading things, the range in between both forks need to be adjusted as needed to make the lots of both forks well balanced and not manipulated, and one side of the item ought to be against the shelf. .
2. It is restricted to work with a solitary fork or use a fork top or pull. In special circumstances, security indication have to be set up to advise bordering pedestrians. .
3. In the process of loading and discharging items, the forklift has to be stopped with the brake. .
4. The speed of the car should be slow and constant. Take care not to roll the wheels on the dunnage, so as not to stretch the rolled objects and hurt people. .
5. When using a fork to fork the goods, the fork must be as deep as possible under the load, and it needs to be kept in mind that the fork tip must not touch various other products or items. The lots ought to be maintained with very little back tilt of the gantry so that the load does not glide in reverse. The mast can be tilted onward somewhat when the lots is lowered to allow for easy positioning of the lots and extraction of the forks. .
6. It is forbidden to fork products at high speed and hit hard things with the fork head. .
7. When the forklift is functioning, it is restricted for individuals to loaf the fork, so regarding prevent the collapse of the goods and harm people. .
8. Overwhelming is banned, and it is banned to use forks to lift employees to engage in high-altitude procedures to stay clear of high-altitude falling mishaps. .
9. It is not enabled to make use of the brake inertia to slip, put, round or roll things. .
10. It is not permitted to utilize forks to choose, turn pallet dump.
Leaving .
1. It is prohibited to leave the forklift when the things on the fork are in the air. Before leaving the forklift, you have to discharge the goods or lower the fork frame.
2. Draw the parking brake handle to dead or depress the parking brake switch.
3. The engine is turned off and the power is cut off. (Except for special circumstances, such as the chauffeur does not leave the car's line of sight and does not exceed 1 minute).
4. Get rid of the trick. .
Forklift Operation Precautions.
1. Prior to and after the forklift procedure, the appearance ought to be checked, and fuel, lubing oil and air conditioning water must be included.
2. Inspect the safety performance of beginning, running and stopping.
3. Inspect whether the lights and horn signals are complete and effective.
4. Throughout the procedure of the forklift, check whether the pressure and temperature level are typical.
5. After the forklift is running, the outside leakage needs to additionally be inspected and the seals ought to be changed in time.
Forklift Safety Operation Specifications.
1. You need to inspect before leaving the car;.
2. When you run into somebody in front of you throughout driving, you must send a signal at a distance of 5 m;.
3. The driving rate in the manufacturing facility does not exceed 5 km/h;.
4. When driving, the nadir of the cargo should be 0.3 m ~ 0.4 m in the air;.
5. The turning need to not be as well sharp to prevent the propensity of " complimentary turning";.
6. Adding and down the slope needs to be sluggish and consistent, and no switching on the incline is enabled.
7. Do not drive throughout the gradient. When the slope is above 10%, the vehicle needs to be driven backwards when worsening;.
8. When the forklift personnel lug the goods and move forward, if they run into big or hefty goods and most likely to the motorist's line of vision, they need to take the turning around workout
.
The "Eight Prohibitions" ought to be adhered to in the procedure.
1. Single fork operation is not enabled.
2. It is not enabled to lift the goods for long distance driving.
3. It is not permitted to grab the goods by passing on the pallet with the fork.
4. It is not permitted to straight shovel chemicals, flammables and various other dangerous chemicals with forks.
5. It is not enabled to use inertia pressure to grab the goods.
6. It is not permitted to make use of stopping pressure to exile round or easy-to-roll things.
7. It is not enabled to bring people to deal with the pallet or fork, and it is purely restricted Electric Forklift Truck for Warehouse to stand under the fork after the fork is raised.
8. Do not drive side to side on slopes
.
Vehicle parking is not permitted under Stand-on Electric Pallet Stacker the following problems.
1. Curves, narrow roadways, railway crossings;.
2. Sections with a longitudinal incline above 5%.
3. When there is an obstacle on one side of the roadway, the opposite side of the area with the exact same size as the barrier ought to be within 20 meters at each end.
Web：https://www.onenforklifts.com/
Email：info2@onen.cn
Phone：+86 13827083844